Radiators
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| Radiators with built-in check valves (manufactured by Saldana Racing Products) |
| Shown here on a 12x17 Spike midget radiator with 3/8" fittings and "The Engine Heater" Alum quick disconnects and dust caps |
| Weld on valve kits come in 1 1/2" for midgets & sprints and 1 3/4" for late models and with either 3/8" fittings for "The Engine Heater" or 1/2" fittings for other engine heaters |
Call for pricing - (adds $100 to cost)
Save space with the one-way Alum double butterfly check valve (same valve
as in the lower radiator hose valve) built right in to your radiator.
Cut off your radiator outlet and weld on this valve and the return for the heater
can go anywhere in the radiator (weld bungs included in kit).
Don't know a good Alum welder? Send your radiator to us and we'll get it done.
Or you can order a brand new radiator custom made for your car with the
valve already installed made by Saldana Racing Products.
as in the lower radiator hose valve) built right in to your radiator.
Cut off your radiator outlet and weld on this valve and the return for the heater
can go anywhere in the radiator (weld bungs included in kit).
Don't know a good Alum welder? Send your radiator to us and we'll get it done.
Or you can order a brand new radiator custom made for your car with the
valve already installed made by Saldana Racing Products.
| Weld-on kit shown here on a 20x20 used sprint car radiator with Alum quick disconnect nipples and dust caps. This makes for easy access to the valve from the right side of the car, eliminating the need for a remote bracket. |
| New 16x20 Sprint car radiator by Saldana Racing |